Setting Up The Receiver; Connecting To An Hdtv Monitor - ActionTec SBWD100B User Manual

Setting Up the
Receiver
This chapter details how to connect the Receiver to an HDTV monitor, and how to
set it up for the first time. Make sure you have all the contents from the Receiver's
package available before beginning the installation.

Connecting to an HDTV Monitor

To connect the Receiver to an HDTV monitor, make sure the following items are
available:
ScreenBeam Pro Education Edition 2 Wireless Display
s
Receiver
HDMI to VGA Adaptor
s
AC power cord
s
VGA Cord
s
To connect the Receiver to a Projector:
1. Plug one end of the supplied HDMI to VGA Adaptor into the HDMI port
(Video Out) on the Receiver, and the other end into a VGA Cord.
2. Plug the remaining end of the VGA Cord into your projector or VGA drop
in the wall.
3. Plug the other end of the power cord into a nearby electrical outlet. The
Power LED will illuminate green.
3
2