Setting Up Wireless Network Parameters - ActionTec SBWD100B User Manual

4. The receiver reboots, and new settings take effect after the reboot.

5.3.20. Setting up Wireless Network Parameters

When AGO is disabled, you can define wireless network parameters for local management
web server, including wireless network name (SSID) and password, IP address, and subnet
mask.
1. Go to the Network Settings tab page by clicking the Network Settings tab.
2. Go to the Wireless Interface Settings section, and properly configure the network
parameters.
Wireless Network Name (SSID) and Wireless Network Password: The SSID and
password for accessing the receiver's wireless network. The SSID is displayed when
AGO is disabled.
Wireless IP Address: It is the IP address of the local management web server. This IP