Toshiba RAV-SP560AT-E Service Manual page 205

No. Part name
…
Cycle P .C. board
Procedure
1) Perform the works in 1 of
2) Remove connectors and lead wires
which are connected from the cycle P .C.
board to other parts.
1. Connector
CN800: Connection with IPDU P .C.
board (5P: Red)
CN01: Connection with IPDU P .C.
board (5P: Red) *(Note 1)
CN02: Indoor/Outdoor connection
terminal block (3P: Black)
*(Note 1)
CN03: Connection with IPDU P .C.
board (3P: White) *(Note 1)
CN04: Connection with IPDU P .C.
board (2P: White) *(Note 1)
*(Note 1)
Remove the connectors by releasing lock of
the housing.
3) Remove the supporting hooks at 4
corners to remove the cycle P .C. board.
4) Mount a new cycle P .C. board.
5) Lift up the hook (upper left) with the
partition plate upward just removing.
 ƒ
and .
– 205 –
RAV-SM1100/1400AT-E
RAV-SP1100/1400AT-E
Remarks
Cycle control P.C. board assembly
P.C. board fixing hooks
(4 positions)