The MP Main Menu is displayed:
Figure 4-8 MP Main Menu
Configuring LAN Information for the MP
To set the MP LAN IP address:
1. At the MP Main Menu prompt (MP>), enter cm. From the MP Command Menu prompt (MP:CM>), enter
lc (for LAN configuration).
The default values are displayed, and a prompt, asking if default values are to be modified, is displayed. It
is a good idea to write down the information, because it might be required for future troubleshooting.
NOTE
If the Command Menu is not shown, enter q to return to the MP Main Menu, then enter
cm..
Chapter 4
Cable Connections
MP Core I/O Connections
81