Display/Delete Event Log - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 System Management
1.9 Event/Dump Management
1.9.2

Display/Delete Event Log

This function displays the event history of the ETERNUS DX.
The event log is one of the internal logs stored in the ETERNUS DX. The event log contains a history of events
that are related to configuration information changes, such as module failures and volume creation.
Up to 1600 (800 per CM) event logs can be displayed. Once the recorded event log is no longer required, it can
also be deleted.
Even after deleting the event log using the [Delete Event Log] function, the maintenance information log
remains stored in the ETERNUS DX.
All event logs are deleted in a single operation.
■ Display event logs
The procedure to display event logs is as follows:
Procedure
1
Click [Display/Delete Event Log] in [Action].
2
Check the displayed event logs.
148
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0