Event/Dump Management; Setup Event Notification - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 System Management

1.9 Event/Dump Management

1.9 Event/Dump Management
This section describes event/dump management.
Event/dump management provides the following functions:

• Setup Event Notification

• Display/Delete Event Log
• Export/Delete Log
• Export/Delete Panic Dump
1.9.1 Setup Event Notification
This function specifies whether to report events that are detected in the ETERNUS DX.
There are six methods for event notification: Host Sense Key Code Qualifier, SNMP Trap, E-Mail, syslog, REMCS,
and AIS Connect.
A notification setting can be selected for each type of event.
• For SNMP Trap notification, performing procedures in the following sections is required.
- "1.8.3 Setup SNMP Agent Basic Interface" (page 111)
- "1.8.4 Setup SNMP Manager" (page 113)
- "1.8.5 Setup SNMP Agent MIB Access View" (page 115)
- "1.8.6 Setup SNMP Agent User" (page 117)
- "1.8.7 Setup SNMP Agent Community" (page 120)
- "1.8.8 Setup SNMP Agent Trap" (page 123)
• For E-Mail notification, performing procedure in
• For syslog notification, performing procedure in
• For REMCS notification, performing procedure in
• For AIS Connect notification, performing procedure in
is required.
When selecting REMCS for event notification, only the REC related error event settings can be changed.
For details on the parameters for this function, refer to
For the factory default settings for this function, refer to
The procedure to set the event notification is as follows:
Procedure
1
Click [Setup Event Notification] in [Action].
"1.8.12 Setup E-Mail Notification" (page 130)
"1.8.13 Setup Syslog" (page 132)
"1.13.2 Setup Remote Support" (page 193)
144
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"1.14.1 Setup AIS Connect Environment" (page 206)
"A.1.8.1 Setup Event Notification" (page
"Appendix B Setup Event Notification" (page
is required.
is required.
is required.
726).
983).
P2X0-1270-13ENZ0