Event Notification; Figure 43 Event Notification; Table 27 Levels And Contents Of Events That Are Notified - Fujitsu ETERNUS DX100 S4 Design Manual

2. Basic Functions
Operation Management/Device Monitoring
When the ETERNUS DX is rebooted, the performance monitoring process is stopped.
•
• If performance monitoring is started from ETERNUS SF Storage Cruiser, ETERNUS Web GUI or
ETERNUS CLI cannot stop the process.
• If performance monitoring is started from ETERNUS Web GUI or ETERNUS CLI, the process
can be stopped from ETERNUS SF Storage Cruiser.

Event Notification

When an error occurs in the ETERNUS DX, the event notification function notifies the event infor-
mation to the administrator. The administrator can be informed that an error occurred without
monitoring the screen all the time.
The methods to notify an event are e-mail, SNMP Trap, syslog, remote support, and host sense.

Figure 43 Event Notification

Server (host)
The notification methods and levels can be set as required.
The following events are notified.

Table 27 Levels and Contents of Events That Are Notified

Level
Error
Warning
Notification (information)
*1: Battery related events are notified only for the ETERNUS DX100 S4/DX200 S4.
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic)
Mail SNMP
server manager
E-mail SNMP Trap
Host sense
ETERNUS DX
Level of importance
Maintenance is necessary
Preventive maintenance is
necessary
Device information
82
Copyright 2023 Fujitsu Limited
Syslog server
Syslog
Remote
support
center
REMCS
Event contents
Component failure, temperature error,
end of battery life (*1), rebuild/copy-
back, etc.
Module warning, battery life warning
(*1), etc.
Component restoration notification,
user login/logout, RAID creation/dele-
tion, storage system power on/off, firm-
ware update, etc.
P3AM-7642-32ENZ0