Chapter 1 System Management
1.8 Network Management
The procedure to perform the SNMP Trap test is as follows:
Procedure
1
Click [Send SNMP Trap] in [Action].
Click the [Send] button.
A confirmation screen appears.
2
Click the [OK] button.
The SNMP Trap test is performed.
3
Click the [Done] button to return to the [Network] screen.
Confirm that the trap has been successfully received by SNMP Manager after the SNMP Trap test has
been performed.
128
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0