Fujitsu ETERNUS DX60 S3 User Manual page 464

Chapter 4 Connectivity Management
4.4 LUN Group Management
3
Click the [Add] button.
 The [Add LUN] screen is displayed.
To delete the allocation information between LUNs and volumes, select the checkbox for allocation
information to delete and click the [Delete] button.
4
Specify the LUNs and the number of LUNs, to allocate volumes to and select the volume
numbers to be allocated to the corresponding LUNs.
The main setting items are as follows.
●
LUN Setting
• Start Host LUNs
• Number of LUNs
• Select Volume
If an error screen appears under the following conditions, check the parameter settings.
• The LUN volume, which is specified in "Start Host LUNs", has already been allocated to a different
LUN
• The necessary number of LUNs, which have been specified in "Number of LUNs", cannot be
allocated to the LUN volumes
5
Click the [OK] button.
 Returns to the [Add LUN Group] screen.
464
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0