Fixing System; Fixing Film Unit; Removing The Cassette; Removing The - Canon LaserBase MF3220 Series Service Manual

Chapter 3
[2]

3.6 FIXING SYSTEM

3.6.1 Fixing Film Unit

3.6.1.1 Removing the Cassette

1) Remove the cassette by holding the cassette handle.
3.6.1.2 Removing the front cover
1) Open the front cover [1] and remove the arm claws [2] to disengage the
connection.
2) Remove the shafts on both sides [3] while warping the shaft arms inside,
and remove the front cover.
[3]
[1]

3.6.1.3 Removing the right cover

1) Remove the 2 screws [1] on the right cover.
2) Remove the right cover [1].
- 2 screws [2]
3-40
[1]
F-3-254
[3]
[2]
F-3-255
[1]
F-3-256
[1]
[2]

3.6.1.4 Removing the left cover

1) Remove the 2 screws [1] on the left cover.
0012-1733
0012-1734
[1]
2) Remove the left cover [1].
- 2 screws [2]
0012-1735

3.6.1.5 Removing the rear cover

1) Opening the face-up cover [1], and then lower the fixing pressure release
levers [2] on both sides and release the pressure.
2) Remove the rear cover [3] by sliding it to the rear.
- 4 screws [4]
[4]

3.6.1.6 Removing the Scanner Unit

1) Remove the connector [1] and the flat cable [2] on the ECNT board, and
remove the screw [3]. (Remove the flat cable from the core.)
F-3-257
F-3-258
F-3-259
[2]
[4]
[1]
[3]
F-3-260
0012-1736
[1]
[2]
0012-1737
0012-1738