Removing The Rear Cover; Removing The Cassette; Removing The; Removing The Left Cover - Canon LaserBase MF3220 Series Service Manual

Chapter 3
[1]
[1]
[2]

3.1.9 Power Supply PCB

3.1.9.1 Removing the Cassette

1) Remove the cassette by holding the cassette handle.
3.1.9.2 Removing the front cover
1) Open the front cover [1] and remove the arm claws [2] to disengage the
connection.
2) Remove the shafts on both sides [3] while warping the shaft arms inside,
and remove the front cover.
[3]
[1]

3.1.9.3 Removing the right cover

1) Remove the 2 screws [1] on the right cover.
2) Remove the right cover [1].
- 2 screws [2]
3-8
[2] [5]
[6] [3] [4]
F-3-46
[3]
[2]
F-3-47
[1]
F-3-48
[1]
[2]

3.1.9.4 Removing the left cover

1) Remove the 2 screws [1] on the left cover.
0012-1510
0012-1511
[1]
2) Remove the left cover [1].
- 2 screws [2]

3.1.9.5 Removing the rear cover

1) Opening the face-up cover [1], and then lower the fixing pressure release
levers [2] on both sides and release the pressure.
2) Remove the rear cover [3] by sliding it to the rear.
0012-1512
- 4 screws [4]
[4]
3.1.9.6 Removing the Power Supply Shield Plate
1) Remove the cable from the cable guide.
- 1 connector [1]
F-3-49
F-3-50
F-3-51
[2]
[4]
[1]
[3]
F-3-52
0012-1513
[1]
[2]
0012-1514
0012-1515