Removing The; Removing The Right Cover; Removing The Left Cover; Removing The Rear Cover - Canon LaserBase MF3220 Series Service Manual

Chapter 3
[1]

3.1.7 SCNT Board

3.1.7.1 Removing the Cassette
1) Remove the cassette by holding the cassette handle.
3.1.7.2 Removing the front cover
1) Open the front cover [1] and remove the arm claws [2] to disengage the
connection.
2) Remove the shafts on both sides [3] while warping the shaft arms inside,
and remove the front cover.
[3]
[1]

3.1.7.3 Removing the right cover

1) Remove the 2 screws [1] on the right cover.
2) Remove the right cover [1].
- 2 screws [2]
3-6
[2]
F-3-33
[3]
[2]
F-3-34
[1]
F-3-35
[1]
[2]

3.1.7.4 Removing the left cover

1) Remove the 2 screws [1] on the left cover.
0012-1497
0012-1498
[1]
2) Remove the left cover [1].
- 2 screws [2]

3.1.7.5 Removing the rear cover

1) Opening the face-up cover [1], and then lower the fixing pressure release
0012-1499
levers [2] on both sides and release the pressure.
2) Remove the rear cover [3] by sliding it to the rear.
- 4 screws [4]
[4]

3.1.7.6 Removing the Scanner Unit

1) Remove the connector [1] and the flat cable [2] on the ECNT board, and
remove the screw [3]. (Remove the flat cable from the core.)
F-3-36
F-3-37
F-3-38
[2]
[4]
[1]
[3]
F-3-39
0012-1500
[1]
[2]
0012-1501
0012-1502