External And Controls System; Front Cover; Removing The Cassette; Removing The - Canon LaserBase MF3220 Series Service Manual

3.1 EXTERNAL AND CONTROLS SYSTEM

3.1.1 Front Cover

3.1.1.1 Removing the Cassette

1) Remove the cassette by holding the cassette handle.
3.1.1.2 Removing the front cover
1) Open the front cover [1] and remove the arm claws [2] to disengage the
connection.
2) Remove the shafts on both sides [3] while warping the shaft arms inside,
and remove the front cover.
[3]
[1]

3.1.2 Rear Cover

3.1.2.1 Removing the Cassette

1) Remove the cassette by holding the cassette handle.
3.1.2.2 Removing the front cover
1) Open the front cover [1] and remove the arm claws [2] to disengage the
connection.
2) Remove the shafts on both sides [3] while warping the shaft arms inside,
and remove the front cover.
[3]
[1]

3.1.2.3 Removing the right cover

1) Remove the 2 screws [1] on the right cover.
[3]
[2]
F-3-1
[3]
[2]
F-3-2
0012-1395
0012-1396
2) Remove the right cover [1].
- 2 screws [2]
[1]
[2]

3.1.2.4 Removing the left cover

1) Remove the 2 screws [1] on the left cover.
0012-1405
0012-1406
[1]
2) Remove the left cover [1].
- 2 screws [2]
0012-1398

3.1.2.5 Removing the rear cover

1) Opening the face-up cover [1], and then lower the fixing pressure release
levers [2] on both sides and release the pressure.
2) Remove the rear cover [3] by sliding it to the rear.
- 4 screws [4]
Chapter 3
[1]
F-3-3
F-3-4
F-3-5
[1]
[2]
F-3-6
0012-1401
0012-1402
3-1