Removing The Rear Cover; Removing The Scanner Unit; Removing The Top Cover; Removing The Right Frame - Canon LaserBase MF3220 Series Service Manual

Chapter 3

3.1.11.5 Removing the rear cover

1) Opening the face-up cover [1], and then lower the fixing pressure release
levers [2] on both sides and release the pressure.
2) Remove the rear cover [3] by sliding it to the rear.
- 4 screws [4]
[4]
[1]

3.1.11.6 Removing the Scanner Unit

1) Remove the connector [1] and the flat cable [2] on the ECNT board, and
remove the screw [3]. (Remove the flat cable from the core.)
2) Remove the 2 screws [4] and the 2 pins [5] on the right and left sides.
[1]
3) Remove the scanner unit [1] by sliding it to the rear and lifting it up.
- 2 screws [2]
3-12
[1]
[2]
F-3-73
[2]
[4]
[3]
F-3-74
[3]
[4]
[5]
[2]
F-3-75
[1]
0012-1534

3.1.11.7 Removing the top cover

1) Free the 2 claws [1], and remove the top cover [2].
- 2 screws [3]
0012-1535
[1]

3.1.11.8 Removing the Right Frame

1) Remove the right frame [1].
- 3 screws [2]

3.1.11.9 Removing the Plate

1) Remove the plate [1].
- 1 connector [2] on the ECNT board
- 3 screws [3]
[2]
F-3-76
[3] [2]
[1]
F-3-77
[2]
[1]
[2]
F-3-78
0012-1538
0012-1539
0012-1540