Datamax M-class Mark II Operator's Manual page 20

3.1.2 Buttons
The three buttons,
printer's operational mode.
Ready Mode Functions
These functions can be performed at any time when the printer is at idle.
Function
Pause
Feed / Clear Fault
Cancel
Soft Reset
Print Test Label
Print Configuration
Label
Print Ethernet Label
Quick Calibration
Empty Calibration
Delayed Power-up Functions
Turn on the printer, when the three lights turn on press and hold the button sequence. Continue to hold the
button(s) until the three lights turn off.
Function
Hex Dump
Level 1 Reset
Level 2 Reset
14
, , and
PAUSE
FEED
Button(s)
Pause
Feed
Cancel
Press and Hold
Pause & Cancel
Pause & Feed
Feed & Cancel
Pause, Feed & Cancel
Press and Hold Feed
Press and Hold Pause
& Feed
Button(s)
Feed
Pause & Cancel
Pause, Feed & Cancel
perform different functions based on the
CANCEL
Description
Pauses and un-pauses the printer
Feeds one label or clears fault condition
Cancels the current batch of labels. Press the
Pause button to print the next batch of labels in
the printers buffer.
Resets the printer, see section 5.8
Prints the Test Label
Produces Database Configuration and Test Label
Prints the printers Ethernet configuration
Performs a "Quick Calibration", see section 3.5
Performs a "Empty Calibration", see section 3.5
Description
Enters Hex Dump Mode, see section 6.3
Resets the printer to a saved configuration file,
see section 5.8.
Resets the printer to the default factory
settings, see section 5.8.
Chapter 3 - Printer Operation