Camera Adjustment 4 - Sony DSC-F828 Adjustment

9. CAMERA Adjustment 5
Note: "CAMERA Adjustment 5" is available only once after the
power is turned on. If the adjustment is retried, turn off the
power and turn on again.
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Strobe Adj.
3. AF Laser Output Adj.
4. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the [CAMERA Adjustment 5 Start] button.
2) The Automatic Adjustment Program executes the "1. Data
Setting during Camera Adj.".
3) Upon successful completion of the "1. Data Setting during
Camera Adj.", the following message is displayed. Set the sub-
ject in accordance with the message.
(For the Flash adjustment box, refer to "4. Preparing the Flash
Adjustment Box" (see page 6-6).)
[OK]
4) Press the
ecuted.
5) During execution of "2. Strobe Adj.", the following message
is displayed. After checking the flashing of strobe light, click
[OK]
the button. (This message is displayed 2 times during
execution of adjustment.)
DSC-F828
Fig. 6-1-49
button, and the "2. Strobe Adj." will be ex-
Fig. 6-1-50
6) Upon successful completion of "2. Strobe Adj.", "3. AF Laser
Output Adj." is executed.
7) Upon successful completion of the "3. AF Laser Output Adj.",
the "4. Release of Data Setting during Camera Adj." will be
executed successively.
8) Upon successful completion of all items of the CAMERA
Adjustment 5, the following message is displayed. Click the
[OK]
button.
6-23
Fig. 6-1-51