Camera Section Adjustment; Preparations Before Adjustment; List Of Service Tools - Sony DSC-S70 Service Manual

5-1. CAMERA SECTION ADJUSTMENT

1-1.

PREPARATIONS BEFORE ADJUSTMENT

1-1-1. List of Service Tools

• Oscilloscope
• Regulated power supply
Ref. No.
J-1 Filter for color temperature correction (C14)
J-2 Pattern box PTB-450
J-3 Color chart for pattern box
Adjustment remote commander (RM-95 upgraded).
J-4
(Note 1)
J-5 Siemens star chart
J-6 Clear chart for pattern box
J-7 CPC-9 jig (Note 2)
J-8 Mini pattern box
Extension cable (16P, 0.5mm, L=100mm)
J-9
Extension cable (16P, 0.5mm, L=200mm)
J-10 Extension cable (18P, 0.5mm)
J-11 Back ground paper
Note 1: If the micro processor IC in the adjustment remote
commander is not the new micro processor (UPD7503G-
C56-12), The pages cannot be switched. In this case,
replace with the new micro processor (8-759-148-35).
J-1 J-2
J-6 J-7
J-11
• Color monitor
• Digital voltmeter
Name
J-3
J-8
• Vectorscope
Parts Code
Auto white balance adjustment/check
J-6080-058-A
White balance adjustment/check
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A For checking the flange back
J-6080-621-A
For connecting the adjustment remote commander
J-6082-393-C
For adjusting the LCD block
J-6082-353-B For adjusting the flange back
J-6082-357-A
For extension between the DD-141 board (CN851) and
the SL-56 board (CN251)
J-6082-398-A
For extension between the CD-282 board (CN401) and
J-6082-423-A
the SY-58 board (CN101)
J-2501-130-A For adjusting the strobe
Note 2: The old CPC-9 jig (Parts code: J-6082-393-B) cannot be
used, because it cannot operate the adjustment remote
commander.
J-4
J-9
Fig. 5-1-1
5-3
Usage
J-5
J-10