Color Electronic Viewfinder; Adjustment; Data Setting During Evf System Adjustments; Evf Initial Data Input - Sony DSC-F828 Adjustment

1-5.

COLOR ELECTRONIC VIEWFINDER

ADJUSTMENT

Note1: When replacing the LCD unit, be careful to prevent damages
caused by static electricity.
Note2: If you perform the adjustments with FINDER/LCD switch (Control
switch block (UNDER)) removed, set the following data.
1) Select page: 80, address: 10, and set data: 1A.
2) Select page: 80, address: 11, and set data: 01.
Reset the data after completing adjustment.
1) Select page: 80, address: 10, and set data: FF.
2) Select page: 80, address: 11, and set data: 00.
Switch setting:
FINDER/LCD .......................................................... FINDER

1. Data Setting during EVF System Adjustments

Perform the following data setting before the EVF system
adjustments.
Note: When the power is turned off, some data settings will be released.
So perform this data setting again when the power is turned off.
Order Page Address Data
1 00 01 01
2 80 70 01
After completing the EVF system adjustments, release the data
setting.
Order Page Address Data
1 80 70 00
2
3
4 00 01 00
Procedure
Set the data.
Set the data.
Procedure
Set the data.
Save the data.
Wait for 2 sec.
Set the data.

2. EVF Initial Data Input

Mode
Signal
Adjustment Page
Adjustment Address
Adjusting method:
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 8F, and set the data in the following table.
3) Save the data.
4) Wait for 2sec.
5) Select page: 00, address: 01, and set data: 00.
Address Data
70 53
71 96
73 80
74 A4
75 8D
76 40
77 00
78 90
7A 80
7C 38
6-31
DSC-F828
PLAY ( )
Arbitrary
8F
70, 71, 73 to 78, 7A, 7C
Remark
Fixed data
Fixed data
VCO adj.
V COM adj.
Bright adj.
Fixed data
Fixed data
White balance adj.
White balance adj.
Contrast adj.