Af Laser Output Adjustment - Sony DSC-F828 Adjustment

18. AF Laser Output Adjustment

Adjust the AF laser output power.
Mode STILL (P AUTO) (P)
Subject Background paper (J-2501-130-A).
(50cm from the front of the lens)
Measurement Point Data of page 6F, address: 13
Measuring Instrument
Adjustment Page 6F
Adjustment Address 10 to 16
Specified Value 00
Note1: Perform this adjustment in the dark room or use the flash
adjustment box.
Note2: Any light other than the strobe light should not light up the plate.
Switch setting:
ZOOM .................................................................... WIDE end
Adjusting method:
Order Page Address Data
1
2 6F 10 20
3 6F 15 48
4 60 01 AF
5
6
7 60 02
8 6F 13
Note3: The adjustment data will be automatically input to page: 6F,
address: 10 to 16.
Processing after Completing Adjustments:
Order Page Address Data
1 60 01 00
2
Procedure
Check that "1. Data Setting
during Camera System
Adjustments" is performed.
Set the data.
Set the data.
Write the data.
Check that the AF laser is lit.
Wait for 8 sec.
Read the data, and check it is
"01". (Note3)
Read the data, and check it
satisfies the specified value 1.
Procedure
Write the data.
If finish the camera system
adjustments, release the data
setting.
(See "1. Data Setting during
Camera System Adjustments".)
6-29
DSC-F828