Extended Menu Operations - Sony Betacam SX DNW-A28 Operation Manual

Extended Menu
Item number Item name
911 NO
COMPRESSION
LINE
912 SEQUENTIAL
RECORD INPUT
SIGNAL

6-3-2 Extended Menu Operations

To access the extended menu, consult qualified Sony
service personnel.
How to access the extended menu
Set switch 1 of the S201 on the internal SY-259 board
to ON.
1
ON
S201
In the extended menu, you can carry out the same
operations as in the basic menu except setting of sub-
items.
For details of basic menu operation, see section 6-2-2
"Basic Menu Operations".
6-22
Chapter 6 Setup Menu
Menu items in the 900s, relating to digital processing
Settings
Specify the "NO COMPRESSION" line (1 line in 1 field) for video input .
OFF : No specification.
12H...21H (in 525 mode): Specify one of lines 12 to 21.
9H...22H (in 625 mode): Specify one of lines 9 to 22.
Notes
• The data in the specified line will be recorded and played back without video data rate
compression.
• Data values 0x00 and 0xFF will be converted to 0x01 and 0xFE for playback.
• For the line specified in this item, it is not possible to carry out video adjustment,
chroma adjustment, or other output adjustments.
• When item 726 is set to WIDE, a number of words at the beginning and end of each
line will be subject to horizontal blanking, and will not be played back.
• For playback of a composite signal in jog or variable mode, according to the setting of
item 705, the data will be subject to ESR (edge subcarrier reducer) processing.
Selects the signal input method for sequential recording.
PARALLEL : The video and audio signals you will record are input to the each VTR
separately.
CASCADE: The video and audio signals you will record are input to the one VTR, and
input to the other VTR as SDI output signals.
To set sub-items
1
2
3
Turn the job dial to select the menu item, and press
the dial.
Holding down the STOP button, turn the jog dial to
select the desired sub-item and press the dial.
Turn the jog dial to change the value for the
selected sub-item.