Sony Betacam SX DNW-A28 Operation Manual page 64

Basic Menu
Item number Item name
005 DISPLAY
INFORMATION
SELECT
LOCAL FUNCTION
006
ENABLE
007 TAPE TIMER
DISPLAY
008
MONITORING
SELECTION FOR
VTR-TO-VTR EDIT
CHARACTER
009 a)
TYPE
CHARACTER V-
011 a)
SIZE
a) When setting items 002, 003, 009, and 011, watch the monitor screen, and adjust to the required state.
6-2
Chapter 6 Setup Menu
Settings
Determines the kind of character information which is superimposed on output from the
VIDEO OUTPUT 2(SUPER) connector and display on the monitor when the SUPER in
the submenu is set to ALL/MENU.
T&STA : Time data display information and the unit's status.
T&UB: Time data display information and the user bits.
T&CTL: Time data display information and CTL.
T&T: Time data display information and time code (LTC or VITC) only.
CHARACTER: User-specified text data
If there is an overlap between the setting of this item and the setting of the CTL/LTC/U-
BIT button, it is automatically avoided. For example, if CTL is selected by the CTL/TC/
U-BIT button and this menu item setting is T&CTL, then CTL and LTC are output.
Determines which tape transport control buttons are enabled when this unit is controlled
from external equipment.
DIS: All buttons and switches are disabled.
ST&EJ : Only the STOP button and EJECT button are enabled.
ENA: All buttons and switches are enabled.
Determines whether to display the CTL count in 12-hour mode or 24-hour mode.
+ –12H : 12-hour mode
24H: 24-hour mode
For editing with two DNW-A28/A28P units, determines whether the recording-side VTR
is forced into E-E mode to view the playback-side VTR's playback signals on the
monitor connected to the recording-side VTR.
MANU : Do not force the recording-side VTR into E-E mode.
AUTO: Force the recording-side VTR into E-E mode.
Determines the type of character information (timecode, etc) which is superimposed on
output from the VIDEO OUTPUT 2(SUPER) connector and display on the monitor.
WHITE : White letters on a black background.
BLACK: Black letters on a white background.
W/OUT: White outline letters.
B/OUT: Black outline letters.
Determines the vertical size of character information (timecode, etc) which is
superimposed on output from the VIDEO OUTPUT 2(SUPER) connector and display on
the monitor.
× 1 : Standard size
× 2: 2 times standard size
× 3: 3 times standard size
× 4: 4 times standard size