Sony Betacam SX DNW-A28 Operation Manual page 44

Selecting an Edit Mode
Selecting insert mode
1
Press and hold the EDIT button on the recording-
side VTR.
While holding the EDIT button, the Edit Preset
menu is displayed.
2
Using the F1 to F4 operation buttons, set
ASSEMBLE to OFF. Then specify the signals to
insert by setting one or more of VIDEO, TC
(timecode), and A-CH1 to A-Ch4 (audio of
channels 1 to 4) to ON.
You can toggle between ON and OFF when the
ON/OFF display of the desired item is highlighted.
If the ON/OFF display of the desired item is not
highlighted, release the EDIT button and again
press and hold it.
ASSEMBLE VIDEO
OFF ON
A-CH1 A-CH2
ON ON
For more information about using the Edit Preset menu, see
"Edit Preset menu operations" on the previous page.
3-2
Chapter 3 Editing
TC
OFF
A-CH3 A-CH4
OFF OFF