Sony Betacam SX DNW-A28 Operation Manual page 73

Item number Item name
309 SERVO/AV
REFERENCE SEL
310 REC INHIBIT
Items 311 to 314 (settings for digital audio editing): If you use an editor (BVE-600, etc) or a remote controller which cannot control digital audio
edit preset, select how to activate edit preset of each digital audio channel on the unit using the analog audio edit preset function of the editor or
remote controller.
Item name
Item number
311 ANALOG AUDIO
EDIT PRESET
REPLACE FOR CH
1
312 ANALOG AUDIO
EDIT PRESET
REPLACE FOR CH
2
313 ANALOG AUDIO
EDIT PRESET
REPLACE FOR CH
3
314
ANALOG AUDIO
EDIT PRESET
REPLACE FOR CH
4
Menu items in the 300s, relating to editing operations (continued)
Settings
Select the servo reference signal.
AUTO1 : During recording, an analog composite or digital input video signal is used as
the servo reference signal. During playback, the signal selected by the OUT REF in the
submenu is used as the servo reference signal. If the signal selected by the OUT REF
in the submenu is not connected, an internal reference signal is used.
AUTO2: When the OUT REF is set to REF, and any of the ASSEMBLE, VIDEO, and
A-CH-1 to A-CH-4 is set to ON in the Edit Preset menu, the reference signal for video/
audio signal processing is locked to the input video signal.
EXT: The servo reference signal is forced to be "EXT" (an external reference video
input signal is used).
For details, see 2-4 "Setting Reference Video Signals".
Select the conditions under which recording is inhibited when the REC INHI switch is
set to ON.
ALL : All tape recording is inhibited.
CRASH: Crash recording is inhibited. Select this setting when you wish to carry out
assemble editing.
Note
When the REC INHI switch is set to ON, the REC INHI indicator on the control panel
lights. If an operation inhibited by this item is attempted, the REC INHI indicator
flashes.
Settings
Select how to activate the CH-1 edit preset of the unit.
NO DEFINITION : Not defined
ANALOG CH 1 : Use the edit preset for analog audio channel 1.
ANALOG CH 2 : Use the edit preset for analog audio channel 2.
ANALOG CH 1+CH 2: Use the edit preset for analog audio channel 1 or channel 2.
Select how to activate the CH-2 edit preset of the unit.
NO DEFINITION: Not defined
ANALOG CH 1: Use the edit preset for analog audio channel 1.
ANALOG CH 2 : Use the edit preset for analog audio channel 2.
ANALOG CH 1+CH 2: Use the edit preset for analog audio channel 1 or channel 2.
Select how to activate the CH-3 edit preset of the unit.
NO DEFINITION : Not defined
ANALOG CH 1: Use the edit preset for analog audio channel 1.
ANALOG CH 2 : Use the edit preset for analog audio channel 2.
ANALOG CH 1+CH 2: Use the edit preset for analog audio channel 1 or channel 2.
Select how to activate the CH-4 edit preset of the unit.
NO DEFINITION : Not defined
ANALOG CH 1: Use the edit preset for analog audio channel 1.
ANALOG CH 2 : Use the edit preset for analog audio channel 2.
ANALOG CH 1+CH 2: Use the edit preset for analog audio channel 1 or channel 2.
6-11
Chapter 6 Setup Menu