Checking The Bulbs And Bulb Sockets; Types Of Bulbs - Yamaha YFM45FAR Service Manual

CHECKING THE BULBS AND BULB SOCKETS

EB801020
CHECKING THE BULBS AND
BULB SOCKETS
Check each bulb and bulb socket for damage
or wear, proper connections, and also for
continuity between the terminals.
Damage/wear → Repair or replace the bulb,
bulb socket or both.
Improperly connected → Properly connect.
Incorrect continuity reading → Repair or
replace the bulb, bulb socket or both.

TYPES OF BULBS

The bulbs used on this machine are shown in
the illustration on the left.
Bulbs A and B are used for headlights and
G
usually use a bulb holder which must be
detached before removing the bulb. The
majority of these bulbs can be removed from
their respective socket by turning them
counterclockwise.
Bulb C is used for turn signal and brake/tail
G
lights and can be removed from the socket
by pushing
counterclockwise.
Bulbs D and E are used for meter and
G
indicator lights and can be removed from
their respective socket by carefully pulling
them out.
CHECKING THE CONDITION OF THE
BULBS
The following procedure applies to all of the
bulbs.
1.Remove:
Bulb
G
9 - 6
–
ELEC
and turning the
+
bulb