Yamaha YFM45FAR Service Manual page 179

RECOIL STARTER AND A.C. MAGNETO
2.Install:
Woodruff key
G
Rotor
G
NOTE:
Before installing the rotor, clean the outside
G
of the crankshaft and the inside of the rotor.
After installing the rotor, check that the rotor
G
rotates smoothly. If not, reinstall the key and
rotor.
3.Install:
Dowel pins
G
Gasket
New
G
Crankcase cover (left)
G
NOTE:
When installing the crankcase cover (left),
G
use a long rod to hold the rotor in position
from the outside. This will make assembly
easier. Be careful not to damage the oil seal.
Tighten the bolts in stages, using a
G
crisscross pattern.
4.Install:
Starter pulley 1
G
NOTE:
Use a rotor holding tool 2 to hold the starter
pulley.
Rotor holding tool:
P/N. YU-01235, 90890-01235
NOTE:
Before installing the starter pulley, do not
forget to install the O-ring.
4 - 41
ENG
10 Nm (1.0 m • kg, 7.2 ft • lb)
50 Nm (5.0 m • kg, 36 ft • lb)