Yamaha YFM45FAR Service Manual page 335

FRONT ARMS AND FRONT SHOCK ABSORBER
*****************************************************
Replacement steps:
G
Clean the outside of the front lower arm.
G Remove the circlip 1 and rubber boot 2.
Use the ball joint remover and installer set.
Ball joint remover/installer set:
P/N. YM-01474/90890-01474
Ball joint remover/installer
attachment set:
P/N. YM-01477
3
Body
4
Long bolt
5
Remover washer
6
Remover spacer
7 Installer attachment
8
Installer spacer
9
Installer guide
G Install the body 3, long bolt 4, remover
washer 5 and remover spacer 6 onto ball
joint.
NOTE:
Remover washer 5 must be aligned with the
projection on the head of the ball joint.
G Hold the body 3 in place while turning in the
long bolt 4 to remove the ball joint 0 from
the front lower arm.
G
Remove the ball joint remover/installer.
G Install the long bolt 4, installer spacer 8
and installer guide 9 onto the body 3.
8 - 45
CHAS
YM-01474
90890-01474
YM-01474
90890-01474
YM-01477
YM-01477
YM-01477
YM-01477
YM-01477