Yamaha YFM45FAR Service Manual page 226

MIDDLE GEAR
Attach the gear lash measurement tool 3
G
and dial gauge 4.
Gear lash measurement tool:
P/N. YM-01467, 90890-01467
a 8.12 mm (0.32 in)
G
Measure the gear lash while rotating the
middle driven shaft back and forth.
NOTE:
Measure the gear lash at 4 positions. Rotate
the middle driven gear 90° each time.
G
If the gear lash is incorrect, adjust the gear
lash by middle driven pinion gear shims and/
or middle drive pinion gear shim(s).
*****************************************************
4 - 88
ENG