Checking The Wheel; Checking And Lubricating The Cable - Yamaha YFM45FAR Service Manual

CHECKING AND LUBRICATING THE CABLE

CHECKING THE WHEEL/

CHECKING THE WHEEL
1.Check:
Wheels 1
G
Damage/bends → Replace.
NOTE:
Always balance the wheel when a tire or wheel
has been changed or replaced.
WARNING
Never attempt even small repairs to the
G
wheel.
Ride conservatively after installing a tire
G
to allow it to seat itself properly on the
rim.
CHECKING AND LUBRICATING THE
CABLE
WARNING
A damaged cable sheath may cause
corrosion and interfere with the cable
movement. An unsafe condition may result
so replace a damaged cable as soon as
possible.
1.Check:
Cable sheath
G
Damage → Replace.
2.Check:
Cable operation
G
Unsmooth operation → Lubricate or replace.
Recommended lubricant:
Yamaha chain and cable lube or
Engine oil
NOTE:
Hold the cable end up and apply several drops
of lubricant to the cable.
3.Apply:
Lithium-soap-based grease
G
(onto end of the cable)
3 - 53
CHK
ADJ