Reset
Software
Factory
Defaults
Intimidator™ Wave 360 IRC User Manual Rev. 1
To reset the software on the Intimidator™ Wave 360 IRC, do the following:
1.
Press <MENU> and use the <UP> or <DOWN> buttons to select Setup.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select Reset.
4.
Press <ENTER>. The product will reset all settings in the software.
To load the factory defaults on the Intimidator™ Wave 360 IRC, do the following:
1.
Press <MENU> and use the <UP> or <DOWN> buttons to select Setup.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select Factory Reset.
4.
Press <ENTER>. The product resets to factory default settings.
Page 29 of 34