Table of Contents
Advertisement
Operation
Fan Mode
This setting determines how the fan speed on the Ovation F-145WW is set.
1.
Go to the Fan Mode main level
2.
Select Auto (fan speed will increase or decrease based on product temperature), On (fan speed
will always be at maximum), or Off (fan will always be off).
NOTICE: When operating in Fan Mode: Off, output of the fixture will be reduced and
will not reach the same levels as when using other fan modes.
WARNING: When operating in Fan Mode: Off, the fixture will become hotter to the
touch than when using other fan modes. Use proper protective equipment to prevent
burns. Keep a safe distance from flammable objects.
Back Light
This setting allows for selection of the amount of time the backlight on the Ovation F-145WW's display
stays on after the last button is pressed on the control panel.
1.
Go to the Back Light main level.
2.
Select 10S (10 seconds), 30S (30 seconds), 2Min (2 minutes), or Always On (remains on).
System Information
This option displays the total number of hours the product has run, the installed software version, and the
product's UID.
1.
Go to the Information main level.
2.
Select Fixture Hours, LED Hours, Version, or UID.
Zoom Reset
This setting determines whether the zoom resets when power is applied to the Ovation F-145WW.
1.
Go to the Reset Zoom w/ Power main level.
2.
Select No (zoom stays in last command position when product is turned off) or Yes (zoom resets
when product is turned on).
Factory Reset
This option restores the Ovation F-145WW to factory default settings.
1.
Go to the Factory Reset main level.
2.
Select No or Yes.
Ovation F-145WW User Manual Rev. 5
Page 11 of 15
Advertisement
Table of Contents
