Table of Contents
Advertisement
Operation
Wireless Lumenradio CRMX™ Settings
Toggle CRMX™
To enable or disable wireless CRMX™ control:
1. Go to the Wireless Setting main level.
2. Select the Receive Off/On option.
3. Select from Off (disabled) or On (enabled).
Receiver Reset
To reset the CRMX™ receiver:
1. Go to the Wireless Setting main level.
2. Select the Receive Reset option.
3. Select from No (do not reset) or Yes (reset).
Wireless to DMX
The onAir IP Panel 1 can convert wireless CRMX™ to wired DMX output. To enable or disable this
function:
1. Go to the Wireless Setting main level.
2. Select the Wireless To DMX option.
3. Select from No (do not convert) or Yes (convert).
Display Backlight
To set how long the display will stay lit without activity:
1. Go to the Back Light main level.
2. Select from 10S (10 seconds), 30S (30 seconds), 2Min (2 minutes), or Always On.
Information
To view product information, such as the number of hours the product has been on, the driver firmware,
etc., go to the Information main level.
Factory Reset
To reset the product to factory default settings:
1. Go to the Factory Reset main level.
2. Select No (do not reset) or Yes (reset).
Web Server
The onAir IP Panel 1 Web Server can be accessed by any computer on the same network as the product.
It allows network access to system information, settings such as control protocol and starting address,
color output testing, and the ability to change the Web Server password.
1. Connect the product to a Windows computer with a network cable.
2. On the computer, set the IP address of the new network to have the same first 3 digits as the IP
address of the product (See
3. Enter the IP address of the product into the URL bar of a web browser on the computer.
4. Enter both the User Name and Password as admin to log in.
Home
The Web Server Home page displays the details of all available control personalities and the technical
specifications for the onAir IP Panel 1.
Settings
The Web Server Settings page provides options for control. From the drop-down menus, the Protocol,
Universe, Start Address, IP Address, Ethernet to DMX, Personality, Dimmer Curve, Dimmer Mode, and
PWM Frequency can all be edited. Click Save Settings to send the new configuration to the product.
Output
On the Web Server Output page, an output test of the product's LEDs can be performed, by either editing
the values of each LED manually (by typing the number or moving the fader), or by selecting a sample
color. The page will show the current output color on the bottom left.
Security
The Web Server Security page gives the option to change the password to the connected product's web
server. Enter the old password (admin, by default) and the new password twice, then click Save Settings
to change the password.
onAir IP Panel 1 User Manual Rev. 3
IP
Address).
23
Advertisement
Table of Contents
