Table of Contents
Advertisement
Advanced Operations
Setting
Group
* A print job is a print command sent from a computer to the optional printer controller, then
printed by this machine.
To select the finishing settings
1
Position the document(s) to be copied. (Refer to page 4-1 for more
details.)
2
Select the desired color mode. (Refer to page 2-20 for more details.)
3
Touch [Finishing].
4
Select the desired finishing settings.
The screen shown at the right
appears when the 10-mailbin sorter
(AS-M4110) is installed. If the
finisher is installed, [Sort] and
[Group] do not appear.
5
Specify any other necessary settings.
6
Using the keypad, enter the number of copies you wish to make, and
then press the [Start] key.
KM-C1530
Options Installed
10-Mailbin Sorter (AS-
M4110)
Operation
For a copy job, the output is fed into mailbin
1.
The number of mailbins that can be used to
receive the output can be set between a
maximum of 10 and a minimum of 2,
according to the "Mail Bin Assignment"
parameter setting. For more details, refer to
the section "To set the "Mail Bin
Assignment" parameter" on page 7-14.
6
6-11
Advertisement
Table of Contents
