To Set The "Energy Save Mode" Parameter - Kyocera Mita KM-C1530 Instruction Handbook Manual

7

To set the "Energy Save Mode" parameter

This parameter can be used to specify the length of time (between 1 and
240 minutes) after the last operation until the copier automatically enters
Energy Saver mode. The default setting is "15 min."
1
In the User's Choice screen, touch
[Energy Save Mode].
2
Using the keypad, enter the desired
number of minutes, and then touch
[Enter].
? Do you wish to change the
number of minutes entered?
§
Press the [C] (clear) key to
erase the entered number, and
then use the keypad to enter the
correct number of minutes.
3
In the User's Choice screen, touch [Exit].
7-16
Utility Mode Operations
KM-C1530