Hole Punching ("Hole-Punch" Setting); Types Of Hole Punching; Punched Hole Position - Kyocera Mita KM-C1530 Instruction Handbook Manual

Advanced Operations
6.4

Hole Punching ("Hole-Punch" Setting)

If an optional finisher (F-8430) and a printer controller are installed, holes
for filing the pages in binders can be punched in printouts sent from a
computer.

Types of hole punching

The number of holes punched (either two or three) is automatically
selected according to the paper size and the paper feed method.
G
Number of holes punched: 2
Possible paper sizes: LetterL,
LegalL
Possible paper types: Standard
paper (17 to 24 lbs.)
G Number of holes punched: 3
Possible paper sizes: LetterC,
11 × 17L
Possible paper types: Standard
paper (17 to 24 lbs.)

Punched hole position:

The position of the punched hole differs according to the printed image
and paper orientation.
G
Possible paper sizes: LetterL, LetterC, LegalL, 11 × 17L
KM-C1530
11 × 17L
LegalL LetterC
6
LetterL
6-15