Table of Contents
Advertisement
9
To load paper into the 1st drawer (250-sheet multipurpose paper
drawer)
1
Pull out the paper drawer.
?
Has the paper take-up roller
been touched?
§
Be careful not to touch the
surface of the paper take-up
roller with your hands. If the
roller has been touched, wipe it
with a dry cloth.
2
Press down on the paper-lifting
plate until it locks into place.
3
Load the paper into the drawer so
that the front side of the paper (the
side facing up when the package
was unwrapped) faces up.
?
Have you loaded too much
paper into the drawer?
§
Do not load so much paper that
the top of the stack is higher
than the Ä mark.
Has the paper been loaded correctly?
?
§
Make sure to align the stack of paper.
§
Make sure that the paper is not curled when it is loaded.
Do you wish to load a paper size or type different from that
?
previously loaded?
§
For more details on changing the paper size and type, refer to
"Loading Paper" on page 3-7.
9-2
Touch Panel Messages
Paper take-
up roller
KM-C1530
Advertisement
Table of Contents
