Table of Contents
Advertisement
6
To make settings for single- or double-sided documents and copies
1
Position the document(s) to be copied. (Refer to page 4-1 for more
details.)
2
Select the desired color mode. (Refer to page 2-20 for more details.)
Touch [Orig. Ö Copy].
3
The Orig. Ö Copy screen appears.
4
Select the type of document that is
to be copied and the desired type of
copy.
H
If the recommended memory
(128MB × 2) is not installed, the
screen shown at the right
appears. Select the type of
document that is to be copied.
When is [Compress Mode]
?
touched?
§
If [Compress Mode] is touched,
[Color] (image quality priority) is
set as the default. If the memory
is not installed, touch [Compress] to prevent errors. (Refer to
page 9-45.) Since copy quality will decrease when Compress
Mode is changed, the setting should normally not be changed.
5
Specify any other necessary settings.
6
Using the keypad, enter the number of copies you wish to make, and
then press the [Start] key.
6-4
Advanced Operations
KM-C1530
Advertisement
Table of Contents
