To Set The "Auto Panel Reset" Parameter - Kyocera Mita KM-C1530 Instruction Handbook Manual

Utility Mode Operations

To set the "Auto Panel Reset" parameter

This parameter can be used to turn off ("OFF") the panel reset, or to
specify the length of time (between 1 and 9 minutes) after the last
operation until the touch panel automatically returns to its default settings.
The default setting is "1 min."
1
In the User's Choice screen, touch
[Auto Panel Reset].
2
Using the keypad, enter the desired
number of minutes, and then touch
[Enter].
? Do you wish to change the
number of minutes entered?
§ Press the [C] (clear) key to
erase the entered number, and
then use the keypad to enter the
correct number of minutes.
3
In the User's Choice screen, touch [Exit].
KM-C1530
7
7-15