To Set The "Confirmation Beep" Parameter - Kyocera Mita KM-C1530 Instruction Handbook Manual

Utility Mode Operations

To set the "Confirmation Beep" parameter

This parameter specifies whether or not a confirmation beep is sounded
each time a key in the operation panel is pressed. The default setting is
"ON".
1
In the User's Choice screen, touch
[Confirmation Beep].
2
Select whether the confirmation
beep is sounded ("ON") or not
("OFF"), and then touch [Enter].
3
In the User's Choice screen, touch [Exit].
KM-C1530
7
7-13