To Set The "1St Drawer Paper Select" Parameter - Kyocera Mita KM-C1530 Instruction Handbook Manual

7

To set the "1st Drawer Paper Select" parameter

Use this parameter to specify the size of paper loaded into the 1st drawer.
The default setting is "Auto Detect".
1
In the User's Choice screen, touch
[1st Drawer Paper Select].
2
Select how the size of paper loaded
into the 1st drawer is detected.
? Is the loaded paper a metric or
non-standard size?
§
Touch [Input Size], and then
specify the desired paper size.
Refer to "Paper Specifications"
on page 3-1 for more details.
3
To select the paper size manually,
touch [Input Size], select the
desired paper size, and then touch
[Enter].
4
To specify a paper size other than
those listed, touch [Custom Size],
touch
to specify the desired size, and then
touch [Enter].
7-18
, , , and
Utility Mode Operations
KM-C1530