Paper Misfeed In The Saddle Stitch Unit Of The Saddle Stitch Finisher Mj-1108 (Optional) - Toshiba e-studio 207l Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
 Paper misfeed in the Saddle Stitch unit of the Saddle Stitch Finisher MJ-1108
(optional)
Remove the misfed paper from the exit side of the
1
Saddle Stitch unit.
Open the front cover of the finisher.
2
Holding the green knob, move the guide to the right.
3
Raise the lever and open the upper receiving tray of
4
the finisher.
Open the cover of the Hole Punch Unit when it is
5
installed.
1 TROUBLESHOOTING FOR THE HARDWARE
2
Clearing a Paper Misfeed
1
37