Novell Print In A Netware Environment - Toshiba e-studio 207l Troubleshooting Manual

6 TROUBLESHOOTING FOR NETWORK CONNECTIONS
 Novell print in a NetWare environment
No
Check...
.
1 Are the IPX/SPX protocols enabled? Is
the correct frame type selected?
2 If applicable, did you successfully set up
queue-based print?
3 Did you configure the equipment for a
NetWare connection?
4 Did you configure the equipment for
NetWare print service?
5 Were the proper printer drivers
installed?
6 Is the IPP port configured with the
correct URL?
7 Can you see the equipment in Windows
Network Neighborhood?
8 Can you print to the equipment?
110 Printing Problems (Network Related)
Yes No Corrective Action
Next Set up the IPX/SPX correctly.

Step

Next Set up the NetWare server properly.

Step

Next Set up the NetWare network settings

Step
correctly.

Next Set up the NetWare print service

Step
correctly.

Refer to the Software Installation
Next

Step Guide to install the proper printer

drivers.
Next Refer to the Software Installation

Step
Guide to configure the proper port.

Next Check that the SMB protocol is enabled

Step
in the client computers.

See the following section to fix the
problem.
  P.90 "Cannot print with the
End
equipment (network connection
problems)"