Paper Misfeed In The Bridge Kit (Optional); Paper Misfeed In The Finisher Mj-1107 And The Hole Punch Unit Mj-6104 (Both Optional) - Toshiba e-studio 207l Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
 Paper misfeed in the Bridge Kit (optional)
1 Open the cover holding the handle of the Bridge Kit.
2 Remove the misfed paper inside the Bridge Unit.
If the misfed paper cannot be removed because the right
side is caught by the fuser unit, follow the steps on  P.26
"Paper misfeed in the fuser unit".
Close the Bridge Kit cover.
3
 Paper misfeed in the Finisher MJ-1107 and the Hole Punch Unit MJ-6104 (both
optional)
Paper misfeed in the upper receiving tray
Raise the lever and open the upper receiving tray of
1
the finisher.
Remove the misfed paper.
2
1 TROUBLESHOOTING FOR THE HARDWARE
2
Clearing a Paper Misfeed
1
29