Size Settings - Kyocera KM-1820 Advanced Operation Manual

System Settings

Size Settings

System Menu/
Counter
or
Common Setting
Enter
or
Orig. /Paper Set
Enter
or
Custom Orig.Size
Enter
5-16
Registering Custom Original Size
If you normally copy or scan from an original size that is not registered in this
machine (non-standard size), it is convenient to register that size in advance. You
can register a custom original size within the following ranges:
Measurement
Inch specifications
Metric specifications
1
Access Custom Orig.Size.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2
Press or
displayed.
3
Use the numeric keys to enter the Y dimension (width) of the original to be
registered.
Once the width is displayed, press Enter. The Size Entry(X) screen is
displayed.
4
Use the numeric keys to enter the X dimension (height) of the original to be
registered.
Once the height is displayed, press Enter. The display shows Registered and
returns to the Orig. /Paper Set screen.
X Range
5.83 to 14.02 inches
148 to 356 mm
to select Custom and press Enter. The Size Entry(Y) screen is
Y Range
3.15 to 8.50 inches
80 to 216 mm
ADVANCED OPERATION GUIDE