Kyocera KM-1820 Advanced Operation Manual page 92

Item
Lock
Partial Lock
Unlock
1
2
3
1
2
3
1
2
3
4
ADVANCED OPERATION GUIDE
Basic > Security > Device
COMMAND CENTER provides the ability to restrict the type of access that can be
accomplished from the operation panel. This can be done by selecting one of the
available settings: Lock, Partial Lock, or Unlock.
Description
Prohibits use of System Menu/Counter and prohibits canceling of jobs from the
Status Menu.
Prohibits use of System Menu/Counter.
The operation panel is fully operable.
• Network access to the machine can be restricted using IP address
designations and/or SNMP settings.
• Network access to the machine can be restricted to allow only specific network
addresses. Refer to Advanced > Protocols > TCP/IP > IP Filters on page 8-19.
• The SNMP Read and Write Community settings function as passwords to
control read and write access to the machine using SNMP. Refer to Advanced
> Management > SNMP on page 8-25.
Basic > Security > User Login
This page lets you add, edit or remove User Logins.
Adding a New User Login
Open the User Login page.
Click Add and enter the information of the user to be used for the User Login.
Click Submit.
Editing the User Login
Open the User Login page.
Click the desired number or name to edit the user and modify their information.
Click Submit.
Deleting the User Login
Open the User Login page.
Check the desired user. If you check ID, all users will be checked.
Click Delete.
Click Delete.
Using COMMAND CENTER
8-7