Machine Settings - Kyocera KM-1820 Advanced Operation Manual

Machine Settings

System Menu/
Counter
or
Function Default
Enter
ADVANCED OPERATION GUIDE
Changing Function Defaults
For functions that you use often, changing the default value to the setting will
minimize the time required to make that setting each time the corresponding function
is used. The following table shows the functions for which the default values can be
changed and their available settings. The factory default settings are shown with an
asterisk (*).
Function
Scan Color Select
Scan Resolution
Original Quality
Exposure
Zoom
Collate
Orig. Placement
File Name Entry
File Name Entry/Additional
Info.
1
Access Function Default.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2
Press or
Enter. The screen for the selected default setting is displayed.
3
Press or
shows Completed and returns to the Function Default screen.
Available Settings
Full Color
Grayscale
* Monochrome
200 x 100 Normal
* 200 x 200 Fine
200 x 400 Sup Fine
300 x 300 dpi
400 x 400 Ult Fine
600 x 600 dpi
* Text + Photo
Photo
Text
Auto
* Manual
Auto
* 100%
Off
* On
Top Edge to Rear
* Top Edge to Left
doc
None
* Date and Time
Job No.
to select the default setting that you want to change and press
to select the new default setting and press Enter. The display
System Settings
Reference
page 2-5
page 2-6
page 1-2, page 2-
5
page 1-2, page 2-
6
page 1-3, page 2-
8
page 1-5
page 1-4, page 2-
8
page 1-11, page
2-10
-
5-5