Deleting A User; User Property - Kyocera KM-1820 Advanced Operation Manual

User Login Management
System Menu/
Counter
or
User/Job Account
Enter
or
User Login Set
Enter
or
User List
Enter
System Menu/
Counter
or

User Property

Enter
6-4

Deleting a User

1
Access User List.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
If User Login setting is enabled you will need to enter an administrator's User
ID, press and enter an administrator's Password and press Enter before the
User/Job Account screen is displayed.
2
Press or
Menu screen is displayed.
3
Press or
displayed.
4
Press left Select. The display shows Deleted, the user is deleted and the User
List screen returns.
User Property
You can verify the information of the login user. However, modification of User Name
and Password is possible. When User Login is set to Off, The User Property screen
is not displayed.
1
Access User Property.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2
Press or
displayed.
3
When register contents are to be modified, press right Select. An edit screen is
displayed.
4
Edit the property and press Enter. The User Property screen display returns.
5
On completion, press Enter. The display shows Registered and the Sys.
Menu/Counter screen returns.
to select the user name required and press right Select. The
to select Delete and press Enter. Delete Are you sure? is
to select the user. The User Property (1/6 to 6/6) screen is
ADVANCED OPERATION GUIDE