Basic Nat - THOMSON SpeedTouch Configuration Manual

6.3.1 Basic NAT

Introduction
GUI
CLI
E-NIT-CTC-20040716-0004 v1.0
Prerequisites:
Outbound: An inside host address (source address) is translated into an outside
address.
Inbound: No traffic can be initiated.
Create a new NAT map and fill in the required information.
Portmap Value
property
ppp_pppoa
Interface
Protocol any
20.0.0.1 (the public IP you have)
Outside address
Access list Define IP address (es) or leave empty.
The NAT map will be mapped when an inside host (within the access list) connects
to an outside host.
Only one inside host can use the NAT map at the same time.
=>:nat mapadd intf=ppp_pppoa type=nat outside_addr=20.0.0.1
Basic NAT
41