Table of Contents
Advertisement
Create an address translation mapping
Create a NAPT map
32
Inside address
Access list
Foreign address
Click Apply.
4
Proceed as follows:
Select the Mappings menu and click New to create a new map
1
Select NAPT from the Type list.
2
Select or fill in all required information:
3
Portmap
properties
Interface
The inside (typically private) IP address(es) to enable
inbound sessions.
You can use the access list to define the address (es)
that are allowed to use the outbound connections.
The foreign address is used to define the address (es)
that are allowed to use the inbound connections.
Description
The name of the IP interface that needs to be address
translated.
Note: The interface must previously have been enabled
for address translation, see
address translation on an interface" on page
"6.1.2 Enable/disable
30.
E-NIT-CTC-20040716-0004 v1.0
Advertisement
Table of Contents
