Table of Contents
Advertisement
6.4.3 NAPT using transparent default server
Introduction
E-NIT-CTC-20040716-0004 v1.0
In configuration
"6.4.1 Basic NAPT" on page 49
address might be exactly the same (strictly same address). In this case, transparent
address translation applies for inbound traffic. No translation is to be made.
The description of the NAPT map is
This is not the most optimal NAPT configuration because there can be port
!
overlaps.
So a better scenario is the following one.
NAPT using transparent default server
the inside address and outside
'NAPT using transparent default server'.
51
Advertisement
Table of Contents
