Table of Contents
Advertisement
E-NIT-CTC-20040716-0004 v1.0
Portmap
Description
properties
Interface
The name of the IP interface that needs to be address
translated.
Note: The interface must previously have been enabled for
address translation, see
translation on an interface" on page
Group
The IP interface group scope for this template.
Timeout
The lifetime for the template.
Type
The type of the template, NAT of NAPT.
Outside address
The outside (typically public) IP address(es) (range).
Inside address
The inside (typically private) IP address(es) (range).
Access list
You can use the access list to define the address (es) that are
allowed to use the outbound connections.
Foreign address
The foreign address is used to define the address (es) that
are allowed to use the inbound connections.
Protocol
The IP protocol on which address translation has to be
applied.
Advantage: To link specific traffic (protocol dependent) to a
chosen private host. Any protocol means all protocols.
Outside port
The outside port number or range.
Inside port
The inside port number or range.
Configure address translation on the CLI
"6.1.2 Enable/disable address
30.
39
Advertisement
Table of Contents
